# Kompal LiFePO4 Solar Battery 5.12kWh – 48V, 100Ah, 10000+ Cycles

- Link: https://techsouk.com/kompal-lithium-battery-5-12kwh-lifepo4/
- Published: 2024-10-16T15:25:45+04:00
- Author: pengjh66

A 5.12 kWh LiFePO4 (Lithium Iron Phosphate) battery is often used in energy storage
systems, including solar power setups, backup power systems, and off-grid solutions.
Here’s an overview of the specifications and features typically associated with 
such a battery:

### Key Specifications:

 1.  **Battery Type**: Lithium Iron Phosphate (LiFePO4)
 2.  **Capacity**: 5.12 kWh (kilowatt-hours)
 3.  **Voltage**: Usually 48V (but can vary; some might be 24V systems)
 4.  **Charge/Discharge Cycles**: Often rated for 3000-6000 cycles at 80% Depth of 
     Discharge (DoD)
 5.  **Rated Capacity**: Around 100-200 Ah (Amp-hours), depending on the specific model
 6.  **Efficiency**: High round-trip efficiency, usually between 95-98%
 7.  **Operating Temperature Range**: Commonly -20°C to 60°C for discharge, 0°C to 
     45°C for charging
 8.  **Weight**: Approximately 40-60 kg (depending on the specific configuration and
     casing)
 9.  **Dimensions**: Varies, but typically compact for easier installation (e.g., wall-
     mountable or rack-compatible)

### Features:

 * **Safety**: LiFePO4 chemistry is known for being stable and safe, with lower 
   risks of overheating or thermal runaway compared to other lithium-ion chemistries.
 * **Longevity**: These batteries have a long cycle life, making them ideal for 
   renewable energy applications where frequent cycling is required.
 * **BMS (Battery Management System)**: Includes protection for over-voltage, over-
   current, short-circuit, and temperature monitoring to extend battery life and
   enhance safety.
 * **Scalability**: Can be connected in series or parallel to increase voltage or
   capacity, allowing for expansion as energy needs grow.

### Specifications:

      |

Electrical Characteristics

  |   Nominal Voltage |   51.2V |  
 |   Nominal Capacity |   100Ah (C5,25°C) |  
 |   Energy |   5120Wh |  
 |   Internal Resistance |   <50mΩ |  
 |   Cycle Life |   >10000 cycles @25°C |  
 |   Months Self Discharge |   <3% |  
 |   Efficiency of Charge |   100% @0.2C |  
 |   Efficiency of Discharge |   96~99% @1C |  
 |

Standard Charge

  |   Charge Voltage |   58.4V |  
 |   Charge Mode |   0.2C to 58.4V, then 58.4V charge current   0.02C(CC/CV) |  
 |   Charger Current |   20A |  
 |   Max. Charge Current |   50A |  
 |   Charge Cut-off Voltage |   <59.2V |  
 |

Standard Discharge

  |   Continuous Current |   50A |  
 |   Max. Pulse Current |   110A(<3s) |  
 |   Discharge Cut-off Voltage |   44V |  
 |

Environmental

  |   Charge Temperature |   0°C to 45°C (32F to 113F) @60±25% Relative Humidity |  
 |   Discharge Temperature |   -20°C to 60°C (-4F to 140F) @60±25% Relative Humidity |  
 |   Storage Temperature |   0°C to 40°C (32F to 104F) @60±25%   Relative   Humidity |  
 |   Water Dust Resistance |   |  
 |

Mechanical

  |   Cell & Method |   3.2V50AH-16S2P |  
 |   Plastic Case |   |  
 |   Dimensions (in./mm.) |   600*420*210±2mm |  
 |   Weight (lbs./kg.) |   53Kg |  
 |   Terminal |   180A terminal |  
 |   Protocol (optional) |   RS485/CAN |  
 |   BMS |   16S100A |

 
